The SMA Power Sets consists of optimally tailored components building a powerful and efficient AC-coupled photovoltaic off-grid system. They are suitable for a wide range of applications. Power may be supplied to remote homes, offices, hospitals or holiday residences.
The intelligent power management optimally uses the existing energy resources and ensures a maximum life time of the battery. Due to the robust design of the components these systems may also be operated even under extreme climates. Thus, a reliable power supply is guaranteed at all times and wherever it is needed.
The coupling of both, the power sources and consumers on the AC side allows for the utilisation of an already existing infrastructure and simplifies an on-site installation. Furthermore, additional energy sources, such as PV, wind and hydro power, fuel cells or chp plants may be easily integrated. Since - depending on weather conditions and the season - the full potential of the renewables will not be available all the time, fuel generators or any other AC source may be connected for backup power supply.
The various components at a glance!
- 2x bi-directional battery inverter SMA Sunny Island 5048 with a total of 10kW AC power output (17kW peak power)
- 5.78kWp solar generator consisting of 33 polycrystalline solar modules Schott Poly 175 with 175Wp each
- PV grid-feed inverter SMA Sunny Mini Central 5000A with 5.5kW AC peak power output
- high-quality pitched roof mounting system for solar generator
- 1143Ah (C10)/48V Hoppecke OPzS tubular plate battery bank with AquaGen® recombination stubs
- acid-proof 3-step battery rack
- battery connections box SMA BatFuse B.03 with fused circuit breakers
- entirely pre-fabricated DC cabling for solar module and battery
Functional principle
The main component of the SMA Power Sets is the bi-directional stand-alone battery inverter Sunny Island. Together wit the battery bank, the Sunny Island creates an AC voltage grid into which all components - from electrical appliances to power generators - can be integrated. In order to increase the output of the AC grid, the entire system may be upgraded up to 20kW 1-phase and up to 60kW 3-phase by parallelling several Sunny Island inverters.
The SMA Power Sets M includes two Sunny Island off-grid inverter connected in parallel. Thus, the total power output of the system amounts to 10kW 1-phase with a short-term peak power of max. 17kW (<1 min.).
The Sunny Island can be easily combined with renewable energy sources like solar or wind power by means of the Sunny Boy resp. Sunny Mini Central and Windy Boy inverters via the AC grid. Their easy installation, high level of efficiency and reliability are more than convincing. Furthermore fuel generators can be connected to the system and controled by the Sunny Island in a particulary fuel-saving manner.
The battery connection box with integrated DC fuse disconnector provides additional safety during installation as well as when operating the system.
The performance data and the functional status of the various components may be recorded centrally by using the Sunny Webbox. Connected to the Internet, the Sunny Webbox can be accessed from all over the world.
System performance
The actual energy made available by the SMA Power Set depends on the geographic location of the installation site. In Central Europe, a constant solar power supply throughout the year is not possible, because of the poor insolation during winter months. According to the application it is recommended to reduce the consumption during these months or to use a conventional power generator to fill the gap. In Southern Europe, the seasonal variations are less distinct and, depending on the site of installation, the energy requirement may be covered entirely by solar power.
For example, the SMA Power Set M is ideal for providing energy to larger remote homes in Southern Europe. With a power output of 10kW the system ensures even the operation of heavy AC consumers. The volume of usable energy that is made available by the 5.775 kWp solar generator, amounts to 6.8500 kWh a year, at an average global irradiation of 5kWh/m² per day. The battery capacity of 38.4 kWh assures a system autonomy of 2 days. We recommend the use of a diesel generator of min. 6kW in order to make up for seasonal variations and to serve as a backup power supply.
Below, please find a summary of the performance data of the SMA Power Set M:
Power Output 1-phase* (230V / 50Hz) at 25°
10kW
20kW
Photovoltaik peak power**
5.775kWp
20kWp
Battery capacity at 48V (C=10h)***
1143Ah
 |
existing |
 |
possible extension |
* 3-phase extension up to 60kW power output possible
** possible extension with the amount of Sunny Islands included by default
*** extension by connecting an identical battery bank in parralel possible, but not recommended!
Average daily available energy (Central Europe)
16.8kWh (ø 4.5kWh/m²/day)
7.5kWh (ø 2kWh/m²/day)
3.4kWh (ø 0.8kWh/m²/day)
Average daily available energy (Southern Europe)
22.5kWh (ø 6kWh/m²/day)
15kWh (ø 4kWh/m²/day)
9.4kWh (ø 2.5kWh/m²/day)
 |
Summer (April - Sept.) |
 |
Winter (Oct. - Mar.) |
 |
Month with lowest insolation (Dec.) |
In any case, before buying this system, check carefully if your requirements are met, in particular if the power set matches the projected consumer profile. Please, also refer to our FAQs for further information or contact us directly.
Solar Generator Mounting Options
There are 3 mounting options available for the solar generator included in this power set. Please do not forget to specify the desired mounting option ordering!
| Pitched Roof - Hook |
Pitched Roof - Hanger Bolt |
Flat Roof / Ground Mount |
| (tiles, pantiles) |
(corrugated sheets, roofing felt) |
(selectable elevation) |
 |
 |
 |
| no surcharge |
no surcharge |
surcharge see option |
Optional Accessories / Upgrades
The following accessories and upgrades are available for this power set. Be sure to choose each desired option when ordering!
SMA Sunny Webbox
Plant monitoring, remote diagnosis, data acquisition and visualization: the Sunny Webbox offers a wide range of functionalities. It continually collects all data regarding the inverter on the system side. Thus you can always be informed of the current status of your system.
Datenblatt SMA Sunny Webbox (PDF)
Aufpreis siehe Artikeloption
Questions & Answers
Which consumers may I operate? How long may I operate them? How long does it take to fully charge the battery? These questions and more will be answered in our FAQs.
Scope of Delivery / Technical Data
| 2x |
Inverter/charger SMA Sunny Island 5048 |
| |
Type / system voltage |
true sine / 48V |
| |
AC continuous power |
5000W |
| |
AC peak power (<1 min.) |
8500W |
| |
Efficiency |
max. 95% |
| |
DC charging current (41 - 63V) |
max. 120A |
| |
AC input power (grid/gen.) |
max. 12.8kW |
| |
Own consumption / stand-by |
25W / 4W |
| |
Protection class (DIN 60529) |
IP30 |
| |
Dimensinos (lxwxh) |
467x612x235mm³ |
| |
Weight |
63kg |
| |
Special features |
2 multifunction relays, 2-line display, MMC/SD-Karte |
| 1x |
Tubular plate battery Hoppecke OPzS 1000Ah / 48V |
| |
Type |
VLA/flooded lead acid |
| |
Number of batteries |
24 |
| |
Nominal voltage / battery |
2V |
| |
Capacity (C=10h) / battery |
1143Ah |
| |
Dimensions (lxwxh) / battery |
215x235x710mm³ |
| |
Weight (filled) / battery |
74.6kg |
| |
Special features |
AquaGen® recombination stubs |
| 1x |
Rack for battery bank |
| |
Type |
plugable steel rack with acid-proof coating |
| |
Layout |
3-step |
| 1x |
PV inverter SMA Sunny Mini Central 5000A |
| |
DC input voltage |
max. 600V |
| |
DC input current |
max. 26A |
| |
Number of strings (parallel) |
max. 4 |
| |
AC output power |
max. 5500W |
| |
Efficiency (Euro-eta) |
max. 96.1% (95.2) |
| |
Protection class (DIN 60529) |
IP65 |
| |
Dimensions (lxwxh) |
468x613x242mm³ |
| |
Weight |
62kg |
| |
Special features |
integrated DC load-disconnecting switch (ESS) |
| 33x |
Solar module SCHOTT Poly 175 |
| |
Type of cells |
monocrystalline |
| |
Peak power (Pmax) / nominal voltage |
175Wp / 24V |
| |
Voltage at Pmax (Vmp) |
35.9V |
| |
Current at Pmax (Imp) |
4.87A |
| |
Dimensions (lxwxh) |
1620x810x50mm³ |
| |
Weight |
15.5kg |
| |
Special features |
pre-mounted connecting cable with TYCO plug socket |
| 1x |
Mounting system for solar generator |
| |
Type of installation |
pitched roof / flat roof or ground mount* |
| 1x |
Battery circuit breaker SMA BatFuse B.03 |
| |
Connection / Type of fuse |
6-pole / NH01 |
| |
Mounting option / protection class |
wall / IP65 |
| |
Dimensions (lxwxh) / weight |
375x500x225mm³ / 16kg |
| |
Special features |
8A auxiliary output |
| 1x |
Cabling |
| |
Module main connecting cable (6x20m) |
H07RNF 6mm² + MC4/MC3 adapter set |
| |
Inverter connecting cable (4x1.5m) |
H07VK 35mm² + ring terminals |
| |
Battery connecting cable (2x6m) |
H07VK 50mm² + ring terminals |
| |
*see article options / subject to change without notice |