The solar power set "PV Power III" offers a stand-alone 230V AC power supply at fair costs and top quality. It is suitable for a wide range of applications, in particular for remote summer houses and weekend homes. You may connect AC consumers up to 500W continuous load and 1200W short-term peak load. The excellent overload capability as well as the true sine wave of the inverter guarantee a safe and trouble-free operation of all consumers such as lighting, TV, video/DVD, radio, water pump, electric tools, fan, cooling box, alarm systems etc.

Features at a glance!

The set consists of 1x inverter Studer AJ600S with 24V system voltage and built-in solar charge regulator, 1x 190 watt peak monocrystalline solar module Suntech STP190S-24/Ad+ incl. pitched roof mounting system, 2x 100 amp-hour maintenance-free solar battery Banner SBG 12-100 as well as the entire pre-fabricated cabling for the solar modules and batteries.

Due to the inverter's built-in solar charge regulator of 15A (short circuit current) charging current at 24V, the system may at all times be upgraded by an additional solar module. A total of 2 solar modules type Suntech STP190S-24/Ad+ (190Wp) with an overall output of 380Wp may be installed. Likewise, the storage capacity may even be upgraded by additional batteries of the same make.

Functional Principle

The solar set "PV Power III" consists of three main components: inverter/solar charger, solar modules and batteries.

The charge regulator takes care that the energy produced by the solar modules is stored in the batteries. It protects the battery bank against harmful overload and, in combination with an intelligent charging algorithm, it guarantees a long lifetime of the batteries.

The inverter transforms the solar energy stored in the battery bank into 230V AC power. It also prevents the batteries from being deep discharged by disconnecting consumer loads in case of a low battery level.

As the solar energy is buffered in the battery, power is available at all times, even at night or during cloudy weather.

Each single component of the power set matches up the other ones perfectly. The integration of inverter and charge regulator, the tailored solar mounting system as well as the pre-fabricated cabling with plug socket reduce installation work to a minimum.

A subsequent upgrading of the set is possible at any time without having to replace any of the existing components!

Performance Overview

The actual energy made available by the "PV Power Set III" depends on the geographic location of the installation site. In Central Europe, a constant solar power supply throughout the year is not possible, because of the poor insolation during winter months. Therefore it is recommended to reduce the consumption during these months. In Southern Europe, the seasonal variations are less distinct and, depending on the site of installation, the energy requirement may be covered entirely by solar power.

Below, please find some examples of the daily energy that may be available:

Average daily available energy (Central Europe)

560Wh (ø 4.5kWh/m²/day)

250Wh (ø 2kWh/m²/day)

100Wh (ø 0.8kWh/m²/day)

Average daily available energy (Southern Europe)

745Wh (ø 6kWh/m²/day)

500Wh (ø 4kWh/m²/day)

310Wh (ø 2.5kWh/m²/day)

	Summer (Apr.-Sept.)		Winter (Oct.-Mar.)		Month with lowest insolation (Dec.)

In case the energy production exceeds the consumption (e.g. weekend application), excess solar power will be stored in the battery. Once the battery is fully charged the following amount of energy is available:

In any case, before buying this system, check carefully if your requirements are met, in particular if the power set matches the projected consumer profile. Please, also refer to our FAQs for further information or contact us directly.

Solar Generator Mounting Options

There are 3 mounting options available for the solar generator included in this power set. Please do not forget to specify the desired mounting option ordering!

Pitched Roof - Hook	Pitched Roof - Hanger Bolt	Flat Roof / Ground Mount
(tiles, pantiles)	(corrugated sheets, roofing felt)	(selectable elevation)
no surcharge	no surcharge	surcharge see option

Questions & Answers

Which consumers may I operate? How long may I operate them? How long does it take to fully charge the battery? These questions and more will be answered in our FAQs.

Scope of Delivery / Technical Data

1x	Inverter/solar charger Studer AJ 600 S
	Type / system voltage	true sine / 24V
	Solar input (Isc)	max. 15A
	AC continuous power	500W
	AC peak power (5 Sek.)	1200W
	Efficiency	max. 94%
	Stand-by consumption	0.4W
	Dimensions (lxwxh)	142x240x84mm³
	Weight	4.5kg
1x	Solar module Suntech STP 190S-24/Ad+
	Peak power (Pmax) / nominal voltage	190Wp / 24V
	Voltage at Pmax (Vmp)	36.5V
	Current at Pmax (Imp)	5.2A
	Dimensions (lxwxh)	1620x810x50mm³
	Weight	17.2kg
	Special features	4mm² module connecting cable with H+S RADOX plug connection
	1x	Mounting system for solar generator
	Type of installation	pitched roof / flat roof or ground mount*
2x	Gel Battery Banner SBG 12-100
	Nominal voltage	12V
	Capacity (C=20h)	100Ah
	Dimensions (lxwxh)	306x168x212mm³
	Weight	30kg
1x	Battery fuse
	Connection	1-pole (in-line)
	Type	strip fuse 100A
1x	Cabling
	Module connecting cabling	H07RNF 2.5mm² H+S RADOX->MC4 adapter cable
	Module main connecting cable (2x10m)	H07RNF 6mm² + MC plug socket/end sleeve
	Battery connecting cable (2x1.5m)	H07VK 10mm² + ring terminals
	*see article options / subject to change without notice