The solar power set "PV Power V" offers high-performance stand-alone 230V AC hybrid power supply. It is suitable for a wide range of applications, in particular for remote homes and offices. You may connect AC consumers with a continuous load of up to 1600W and a short-term peak load of up to 4800W. The excellent overload capability as well as the true sine wave of the inverter guarantees a safe and trouble-free operation of all consumers such as lighting, TV, video/DVD, radio, water pump, power drill, coffee machine, refrigerator etc.

In addition to the solar modules, the public grid or a fuel generator can be connected to the system as power respectively charging source. The entire system may thus be able to maintain an uninterruptible power supply, even during months with low insolation. A built-in change-over contact allows an automatic start and stop of the grid or generator power source.

Features at a glance!

The set consists of 1x inverter/battery charger Studer XPC 2200 S with 24V system voltage and built-in solar charge regulator, 2x 190 watt peak monocrystalline solar module Suntech STP190S-24/Ad+ incl. pitched roof mounting system, 2x 150 amp-hour maintenance-free solar battery Banner SBV 12-150 as well as the entire pre-fabricated cabling for the solar modules and batteries.

Due to the inverter's built-in solar charge regulator of 30A (short circuit current) charging current at 24V, the system may at all times be upgraded by additional solar modules. A total of 5 solar modules type Suntech STP190S-24/Ad+ (190Wp) with an overall output of 950Wp may be installed. Likewise, the storage capacity may even be upgraded by additional batteries of the same make.

Functional Principle

The solar set "PV Power V" consists of three main components: inverter/charger unit, solar modules and batteries.

The charge regulator takes care that the energy produced by the solar modules or by the AC power source is stored in the batteries. It protects the battery bank against harmful overload and, in combination with an intelligent charging algorithm, it guarantees a long lifetime of the batteries.

The inverter transforms the energy produced by the solar modules or the AC power sources, which is stored in the battery bank, into 230V AC power. It also prevents the batteries from being deep discharged by disconnecting consumer loads in case of a low battery level.

As the solar energy is buffered in the battery, power is available at all times, even at night or during cloudy weather.

Each single component of the power set matches up the other ones perfectly. The integration of inverter and charge regulator, the tailored solar mounting system as well as the pre-fabricated cabling with plug socket reduce installation work to a minimum.

A subsequent upgrading of the set is possible at any time without having to replace any of the existing components!

Energy Available

The actual energy made available by the "PV Power Set V" depends on the geographic location of the installation site. In Central Europe, a constant solar power supply throughout the year is not possible, because of the poor insolation during winter months. According to the application it is recommended to reduce the consumption during these months or to use a conventional power generator to fill the gap. In Southern Europe, the seasonal variations are less distinct and, depending on the site of installation, the energy requirement may be covered entirely by solar power.

Below, please find some examples of the daily energy that may be available:

Average daily available energy (Central Europe)

1110Wh (ø 4.5kWh/m²/day)

495Wh (ø 2kWh/m²/day)

200Wh (ø 0.8kWh/m²/day)

Average daily available energy (Southern Europe)

1485Wh (ø 6kWh/m²/day)

990Wh (ø 4kWh/m²/day)

620Wh (ø 2.5kWh/m²/day)

	Summer (Apr.-Sept.)		Winter (Oct.-Mar.)		Month with lowest insolation (Dec.)

In case the energy production exceeds the consumption (e.g. weekend application), excess solar power will be stored in the battery. Once the battery is fully charged the following amount of energy is available:

In any case, before buying this system, check carefully if your requirements are met, in particular if the power set matches the projected consumer profile. Please, also refer to our FAQs for further information or contact us directly.

Solar Generator Mounting Options

There are 3 mounting options available for the solar generator included in this power set. Please do not forget to specify the desired mounting option ordering!

Pitched Roof - Hook	Pitched Roof - Hanger Bolt	Flat Roof / Ground Mount
(tiles, pantiles)	(corrugated sheets, roofing felt)	(selectable elevation)
no surcharge	no surcharge	surcharge see option

Optional Accessories / Upgrades

The following accessories and upgrades are available for this power set. Be sure to choose each desired option when ordering!

Remote Control RCC-01

Remote control with comprehensive LED-display for inverter/charger unit. Also serves as programming interface for the inverter's built-in potential free contact and the individual adjustment of most system parameters. Supplied with 20m cable. Suitable for in- and on-wall mounting.

surcharge see option

Battery Temperature Sensor CT-35

The sensor CT-35 adapts charge voltages to the temperature variations of the battery and thus extents lifetime of the battery under extreme temperature conditions. Supplied with 3m cable.

surcharge see option

Banner Gel batteries (SBG) instead of AGM (SBV)

Gel batteries have a slightly higher cycle lifetime than AGM batteries and are therefore more suitable for applications which exceed standard weekend operation.

Datasheet Banner SBG-Series (PDF)

surcharge see option

Questions & Answers

Which consumers may I operate? How long may I operate them? How long does it take to fully charge the battery? These questions and more will be answered in our FAQs.

Scope of Delivery / Technical Data

1x	Inverter/charger Studer XPC 2200 S
	Type / system voltage	true sine / 24V
	Solar input (Isc)	max. 30A
	AC charger (max. 265Vac / 45-65Hz)	0 - 37A
	AC continuous power	1600W
	AC peak power (5 Sek.)	4800W
	Efficiency	max. 95%
	Stand-by consumption	0.9W
	Dimensions (lxwxh)	410x215x124mm³
	Weight	12.6kg
	2x	Solar module Suntech STP 190S-24/Ad+
	Peak power (Pmax) / nominal voltage	190Wp / 24V
	Voltage at Pmax (Vmp)	36.5V
	Current at Pmax (Imp)	5.2A
	Dimensions (lxwxh) in mm	1580 x808 x35
	Weight	17.2kg
	Special features	4mm² module connecting cable with H+S RADOX plug connection
	1x	Mounting system for solar generator
	Type of installation	pitched roof / flat roof or ground mount*
2x	AGM Battery Banner SBV 12-150
	Nominal voltage	12V
	Capacity (C=20h)	150Ah
	Dimensions (lxwxh) in mm	482 x170 x242
	Weight	44.2kg
1x	Battery fuse
	Connection	1-pole (in-line)
	Type	strip fuse 200A
1x	Cabling
	Module connecting cabling	H07RNF 2.5mm² H+S RADOX->MC4 adapter cable
	Module main connecting cable (2x10m)	H07RNF 6mm² + MC plug socket/end sleeve
	Battery connecting cable (2x1.5m)	H07VK 25mm² + ring terminals
	*see article options / subject to change without notice